Cody Parts - 2008
Forward - Back
SPEEDWAY ACCESSORIES - 2007 - CLUTCH
| PART NUMBER |
DESCRIPTION |
PRICE |
BC-478
|
JRM STEEL CLUTCH PLATE |
$21.00 |
| BC-479 |
NEB STEEL CLUTCH PLATE |
22.00 |
BC-480
 |
NEB CLUTCH HUB |
225.00 |
BC-481
 |
NEB CHAINWHEEL WITH BEARING |
350.00 |
| BC-482 |
NEB SHAFT |
145.00 |
BC-484
 |
LZ OUTER CLUTCH PLATE
This outer plate is made to replace the stock Jawa plate, it is made thicker to give you better starts and has a special metal
spray coating on the inner surface that allows for better grip and longer
lasting life. |
150.00 |
BC-485
 |
NEB OUTER PRESSURE PLATE |
150.00 |
BC-486
|
NEB CLUTCH STUD |
2.25 |
| BC-487 |
NEB CLUTCH CUP |
5.50 |
| BC-488 |
NEB CLUTCH NUT ALUMINUM |
4.00 |
BC-489
|
LZ ALLOY PLATE
This plate was originally designed to give longer
lasting life because the hard chromed plates got premature hot spots that would
ruin the plate. They came up with there own metal spray process that works
better and has a longer life span. |
72.00 |
| BC-490 |
NEB ALLOY CHROME FRICTION PLATE |
68.00 |
| BC-491 |
NEB CLUTCH SPACER |
15.00 |
BC-492
 |
MUSHROOM ROD |
28.60 |
BC-493
|
NEB PARALLEL CLUTCH SPACER |
12.00 |
BC-494
 |
LZ CLUTCH ARM ASSEMBLY W/ BUSHING
This is a must for any serious racer. It
takes all the flex out of the arm and allows for better, smoother action and
quicker starts.
Made from Billet Aluminum and hard anodized |
72.00 |
| BC-495 |
JAWA CLUTCH ARM ASSY. W/ NEEDLE BEARING |
36.00 |
BC-496
 |
CHAINWHEEL SPROCKET WITH HARDWARE
We carry both steel and aluminum chainwheel that
can be machined to fit any clutch we sell. This kit includes a steel or aluminum
sprocket and hardware necessary to bolt it on. |
64.75 |
| BC-497 |
CLUTH ARM ADJUSTING SCREW W/BALLTIP |
7.82 |
| |
| METHANOL CARBURETORS |
BC-499
 |
DELORTO 34 CARBURETOR
This roundslide carburetor is standard equipment
on JRM laydown motorycles. |
480.00 |
BC-500
 |
DELORTO 34mm CARBURETOR This
roundslide carburetor is standard equipment on all upright
motorcycles. |
350.00 |
BC-502
 |
MIKUNI METHANOL CARBURETOR
This carburetor is a good replacement for
older upright machines and comes jetted for methanol. |
225.00 |
| BC-503 |
AMAL CARBURETOR 34mm, 36mm, & 38mm |
350.00 |
| BC-504 |
38MM BING CARBURETOR |
300.00 |
| BC-505 |
CARBURETOR MANIFOLD WITH CLAMPS |
10.00 |
| BC-510 |
CLEAR BRAIDED FUEL LINE PER FOOT |
1.75 |
BC-514
 |
BZ FLAT SLIDE CARBURETOR
This is our best performing carburetor. It
gives you an instant increase of power throughout the range and is used by the
majority of top riders. |
1050.00 |
BC-515
 |
JRM FLAT SLIDE CARBURETOR
This carburetor is a step up from the dellorto and gives you
good power throughout the range and fits all laydown model bikes.
|
640.00 |
BC-516
 |
JRM FLOATLESS CARBURETOR
This is JRM'S newest carburetor for 2007,
its a floatless carb with a flatslide and an adjustable needle. and is standard
equipment on all JRM motorcycles |
680.00 |
| BC-517 |
NEW JRM FLAT SLIDE CARBURATOR W/FLOAT |
720.00 |
| |
| IGNITION |
| BC-520 |
INTERSPAN IGNITION BOX MK22EMD-CB (NEW STYLE) |
800.00 |
| BC-526 |
ENGINE LEAD |
28.00 |
| BC-527 |
CHARGING LEAD |
28.00 |
| BC-529 |
PLUG END FOR WIRE LEAD |
15.00 |
| BC-550 |
CHAMPION SPARK PLUG C-57R |
10.50 |
| BC-551 |
CHAMPION SPARK PLUG G-55R, G-57R |
16.50 |
| BC-555 |
PLUG CAP |
5.95 |
| BC-556 |
SPARK PLUG LEAD WITH CAP |
12.00 |
| |
| TOOLS AND MANUALS |
| BC-558 |
SPANNER FOR OIL DELIVERY |
22.00 |
BC-559
 |
VALVE SPRING SPANNER
This spanner fits into the drill press and
allows you to remove valve springs fast and easy, it is a must for any engine
builder. |
24.00 |
| BC-560 |
JRM MAGNETO GEAR PULLER |
28.00 |
BC-561
 |
JRM SPROCKET CARRIER PULLER
This is one of the tools you need for your
tool kit, it removes the sprocket carrier in order for you to split the cases. |
21.00 |
| BC-562 |
JRM PINION GEAR PULLER (894, 895, 897) |
45.00 |